CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] DIY plasma cnc

on 2014-06-18 15:50:35 UTC
I recently completed a diy CNC plasma system initially using servo motors.
The plasma cutter however gave so much high voltage noise that I converted to stepper.

Make sure you use a good plasma cutter 
Hypertherm, or Lincoln or Miller.

Chinese units, although they cut good, they emit too much electromagnetic noise that it affects the circuits

Taslim


From: "chuckm@... [CAD_CAM_EDM_DRO]" <CAD_CAM_EDM_DRO@yahoogroups.com>
To: CAD_CAM_EDM_DRO@yahoogroups.com
Sent: Monday, June 16, 2014 11:59 AM
Subject: [CAD_CAM_EDM_DRO] DIY plasma cnc

 
Most of the posts in this group are about machining/routing, which I'm interested in, but I am also in need of a CNC plasma cutter.  I recently got access to a PLASMACAM (servo motor, rack and pinion drive, but nothing special for machine travel - the X and Y were on formed mild steel). So I'm thinking I could put together a 30" by maybe 4 ft unit that would do 90% of what we need. 
 
I'm thinking maybe a long cog belt drive with steppers, since speeds can be pretty quick... I cut 1/2" steel plate at 30 inches per minute, and rapids of 100...
Has anyone here built their own or assembled a kit and have feedback?
Does MACH work to control plasmas?

Thanks guys,
Chuck



Discussion Thread

2014-06-16 08:59:36 UTC DIY plasma cnc 2014-06-18 11:01:14 UTC Re: DIY plasma cnc Taslim Hyatali 2014-06-18 15:50:35 UTC Re: [CAD_CAM_EDM_DRO] DIY plasma cnc