CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Current CNC options for Lathes with encoders?

Posted by Hannu Venermo
on 2017-09-21 06:24:59 UTC
If you already have an encoder for index pulse, or tracking, you are all
set.


On 21/09/2017 14:53, Lester Caine lester@... [CAD_CAM_EDM_DRO]
wrote:
> > They seem to recommend a resolution of 2000-10000 cycles per rev so yes,
> > if you have a low resolution encoder you might be better off changing
> > that to a "better" encoder. You could always ask them if your particular
> > encoder resolution is workable or not.
>
> The encoder is build into the back of the Orac and Compact8 so not
> something one would want to change.
>
> > You just said it was for lathes, I'm not used to general purpose lathes
> > having more than 4 axis+spindle.
>
> I'd prefer to switch to something new rather than simply adding yet
> another software package to have to learn ...
>
> > Not trying to convince you, just a bit surprised about your arguments
> > against it :-)
> I'd prefer just the card and a lower customs charge importing it as I
> have 24V UK supplies sitting on the shelf ;)

--
-hanermo (cnc designs)

Discussion Thread

Lester Caine 2017-09-21 02:30:53 UTC Current CNC options for Lathes with encoders? Henrik Olsson 2017-09-21 03:05:14 UTC Re: [CAD_CAM_EDM_DRO] Current CNC options for Lathes with encoders ? Lester Caine 2017-09-21 03:31:03 UTC Re: [CAD_CAM_EDM_DRO] Current CNC options for Lathes with encoders? Henrik Olsson 2017-09-21 04:40:36 UTC Re: [CAD_CAM_EDM_DRO] Current CNC options for Lathes with encoders ? Hannu Venermo 2017-09-21 04:45:06 UTC Re: [CAD_CAM_EDM_DRO] Current CNC options for Lathes with encoders? Lester Caine 2017-09-21 05:53:40 UTC Re: [CAD_CAM_EDM_DRO] Current CNC options for Lathes with encoders? Lester Caine 2017-09-21 06:04:59 UTC Re: [CAD_CAM_EDM_DRO] Current CNC options for Lathes with encoders? Hannu Venermo 2017-09-21 06:24:59 UTC Re: [CAD_CAM_EDM_DRO] Current CNC options for Lathes with encoders? Lester Caine 2017-09-21 07:23:34 UTC Re: [CAD_CAM_EDM_DRO] Current CNC options for Lathes with encoders? Hannu Venermo 2017-09-21 08:28:10 UTC Re: [CAD_CAM_EDM_DRO] Current CNC options for Lathes with encoders? Jon Elson 2017-09-21 09:08:14 UTC Re: [CAD_CAM_EDM_DRO] Current CNC options for Lathes with encoders? Lester Caine 2017-09-21 12:03:03 UTC Re: [CAD_CAM_EDM_DRO] Current CNC options for Lathes with encoders? Steve Blackmore 2017-09-21 13:05:49 UTC Re: [CAD_CAM_EDM_DRO] Current CNC options for Lathes with encoders? 2017-09-22 04:50:44 UTC Re: Current CNC options for Lathes with encoders? Lester Caine 2017-09-22 05:23:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Current CNC options for Lathes with encoders? 2017-09-26 02:28:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Current CNC options for Lathes with encoders? Lester Caine 2017-09-26 03:24:36 UTC Re: [CAD_CAM_EDM_DRO] Re: Current CNC options for Lathes with encoders?