CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] 22" travel single axis suggestions

Posted by
on 2018-09-23 23:55:08 UTC
Good questions.

Deviation vertically is the critical direction. 

For expensive, I'll put a $500 budget on it.

Thanks for the suggestion of the supported rail.

Tim G
Denver, CO


---In CAD_CAM_EDM_DRO@yahoogroups.com, <ajsmith1968@...> wrote :

Defection in which direction?



Define ‘expensive’, especially in the context of no deviation.



Supported rail is pretty cheap these days: https://www.aliexpress.com/item/one-set-SBR16-800mm-with-2-blocks-sbr16uu-Linear-Motion-guide-supported-rail-SBR-linear-shaft/32726991216.html



Bolting a couple of those to something reasonably stiff might work.



Tony





From: CAD_CAM_EDM_DRO@yahoogroups.com [mailto:CAD_CAM_EDM_DRO@yahoogroups.com]
Sent: Saturday, 22 September 2018 2:33 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] 22" travel single axis suggestions




Considering creating a special application machine that would require a single axis with 22" of travel. It will not have to carry more than 10 lbs, but needs to have less than .0005" or better .00025" deviation under the spindle through out the entire travel.



Not worried about how to drive it mechanically or electronically. Just looking for ideas on the least expensive way to build physical parts of the stage.



Ideas?



Thanks,

Tim G

Denver, CO










[Non-text portions of this message have been removed]

Discussion Thread

2018-09-21 09:45:35 UTC 22" travel single axis suggestions Tony Smith 2018-09-22 05:45:04 UTC RE: [CAD_CAM_EDM_DRO] 22" travel single axis suggestions 2018-09-23 23:55:08 UTC RE: [CAD_CAM_EDM_DRO] 22" travel single axis suggestions Denis Knobloch 2018-09-24 04:17:12 UTC RE: [CAD_CAM_EDM_DRO] 22" travel single axis suggestions david cutajar 2018-09-24 14:08:42 UTC Re: [CAD_CAM_EDM_DRO] 22" travel single axis suggestions