RE: Bridgeport vs. Gorton WAS Re: [CAD_CAM_EDM_DRO] Gorton mill

Is a BOSS based on Series I iron?

Carlos

> -----Original Message-----
> From: Rick Dulas [mailto:drspiff@...]
> Sent: Friday, August 25, 2000 11:28 PM
> To: CAD_CAM_EDM_DRO@egroups.com
> Subject: Bridgeport vs. Gorton WAS Re: [CAD_CAM_EDM_DRO] Gorton mill
>
>
> Howdy! As an aside I got a Bridgeport CNC BOSS 5 delivered to Bryan, TX
> from Pawtucket, RI, including the coolant sump and pump, 16"x42" table*,
> one shot lube system*, chrome ways*, ballscrews*, and triple-stack NEMA
> 42 motors* for $2500 + $700 shipping. Not powered up yet as I'm
> replacing the BOSS 5 with Gecko drives and a PC, but it looks like it is
> all there and all the axes move freely. And it sure is BIG. <G>
>
> *All standard equipment on Bridgeport Series I CNC machines.
>
> Darrell wrote:
>
> > PS you can often get a BOSS much cheaper than $3500.00 delivered.
> >
> > ----- Original Message -----
> > From: "Jeff Barlow" <jeff@...>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for
> the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>
>