Re: [CAD_CAM_EDM_DRO] Moving (unloading) large machines..
Posted by
Bertho Boman
on 2000-09-05 05:26:06 UTC
I did the same exact thing but learned something also for the next time.
I had a terrible time because I had to cross some grass to get to the backdoor.
I ended up building a plywood "driveway".
Anyhow, if that will be your problem too, do not rent a regular forklift with the small wheels. There are forklifts with big wheels
that are made for outdoor use.
Live and Learn.
Bertho Boman
=================================
dougrasmussen@... wrote:
I had a terrible time because I had to cross some grass to get to the backdoor.
I ended up building a plywood "driveway".
Anyhow, if that will be your problem too, do not rent a regular forklift with the small wheels. There are forklifts with big wheels
that are made for outdoor use.
Live and Learn.
Bertho Boman
=================================
dougrasmussen@... wrote:
> Group,
>
> If I need to unload a large machine off a truck or trailer I rent a
> forklift. Last time I rented one it cost $150 to have the rental
> company drop a forklift off at my place. $200+/- seems to be the
> average 4 hour rate around here. That covers rental for 4 hours, but
> they usually don't come back and pick it up for at least 24 hours.
Discussion Thread
Bertho Boman
2000-09-05 05:26:06 UTC
Re: [CAD_CAM_EDM_DRO] Moving (unloading) large machines..
Carey L. Culpepper
2000-09-05 06:37:40 UTC
Re: [CAD_CAM_EDM_DRO] Moving (unloading) large machines..
dave engvall
2000-09-05 07:30:25 UTC
Re: [CAD_CAM_EDM_DRO] Moving (unloading) large machines..