Re: [CAD_CAM_EDM_DRO] Eccentric Follower

Alan,
If you don't have 4th axis, it looks like you will need to finish it up on
the lathe. Chuck it with the big hole and cut the slot between the ears.
Darrell

----- Original Message -----
From: "Alan Marconett KM6VV" <KM6VV@...>
To: "CAD CAM EDM DRO" <CAD_CAM_EDM_DRO@egroups.com>; "Sherline"
<sherline@egroups.com>
Sent: Tuesday, September 05, 2000 3:00 PM
Subject: [CAD_CAM_EDM_DRO] Eccentric Follower


>
> Hi to the lists,
>
> I have just uploaded the 3D view and the plan to the "Eccentric
> Follower" CNC Mill problem I described in the CAD_CAM_EDM_DRO list.
> Look in CAD_CAM_EDM_DRO files for the two files: EccFollow.jpg and
> EccPlan.jpg, for anyone that's interested!
>
> Alan
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>
>