Re: [CAD_CAM_EDM_DRO] Re: List of Gcode "flavors" (Format?)

I think that Excel with big characters font so people can print it and locate it near the machine for reference,
regards
mariano


ballendo@... wrote:

>
> Hello All,
>
> Paul has asked "what format" a couple times. I stayed silent in hopes
> there would be some discussion. So... Do we want these list(s) of G
> codes and M codes in HTML,TXT,MS Excel,or..
>
> Mt first thought WAS Excel, for the manipulation ability, but NOW I'm
> thinking HTML. They are obviously intended for internet publication?
> Txt is universal.
>
> What do you all think?
>
> Ballendo
>
> P.S. Paul, For now let's just get them in one place in whatever format
> is easiest for each contributor to use. I wouldn't want to miss some
> of the available input because someone says,"Oh yeah, I'll send those
> codes JUST AS SOON AS I get 'em converted to the "correct" format!
>
> THEN we could look for a trend and go with it.
>
> '******************************************************************
> Paul wrote:
> I've found a list from Microkinetics which I shall add soon...
> Also had a chat with HAAS and had a list for the VF machining centers
> faxed
> over. During the discussion, the companion subject of M codes (or
> words) was
> raised - there appears to be a greater variation with these than G
> codes, So I
> will includ them in my list.
> I doubt whether I'll be able to do much tomorrow, it looks like I
> will have to
> do some real work :-{
>
> Still leaves the original question unanswered though - HTML, plain
> text, or M$
> Excel data format ?
>
> Regards, Paul.
>
> > Why not consider posting them in the files section at CAD_Cam.......
> > bill
> >
> > Thank you, Bill. I really have high hopes for this project. It
> could
> > help a LOT of people.
> >
> > Ballendo
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager