Re: Windows 9x DRO software

Bill !!!! will this software work on Win 3.1 since I have a modest
computer hooked to my machine in my shop.
Paul

--- In CAD_CAM_EDM_DRO@egroups.com, fepap@t... wrote:
> --- In CAD_CAM_EDM_DRO@egroups.com, William Scalione
<scalione@n...>
> wrote:
> > I wrote a VB DRO program to read Tom Kuluga's DRO board if
> > anyone is interested. It works good on my machine, can't say
> > how it will work on yours. Should be ok though. It is based
> > on the code by Tim Goldstein and Tom Kuluga. I really don't
> > need a DRO, It was more a programming exercise than anything else.
> >
> > Anyway, it allows you to display in inches or MM. and allows you
to
> > set any axis to any position. It fills the screen at 640X480, and
> > takes up only part of the screen at higher resolutions. There is
no
> > error checking for the card, if you enter the wrong address it
won't
> > tell you, it just wont work. It will only do 3 axis It's Free.
Get
> > it at http://www.star-telegram.com/homes/scalione/VB_Dro.zip.
> >
> > If you try it, let me know what you think it needs, besides what
> > was mentioned above. if anyone wants 2 Axis or 4 Axis let me
> > know and I'll modify it for you.
> >
> > Bill
>
> scalione@n...
>
> Hi Bill.
>
> I have installed VB DRO on my Camtronics DRO which uses Tom Kuluga's
> software.I had to install two dll.in my Win95 Systems but it now
> seems
> to work ok.The only problem so far are lines that appear when
> changing
> positions.It would be nice to have 4 axis readout and possibility
of
> naming them.Last but certianly not least words:Thanks for the
> software
> and I am looking foward to the future changes.
>
> Regards
> Frank Papineau