Re: [CAD_CAM_EDM_DRO] Stepper Motor

it would be a 1.05V motor. The maximum buss voltage the windings can take
is 75V.
Dan
-----Original Message-----
From: James Owens <wotisname@...>
To: CAD_CAM_EDM_DRO@egroups.com <CAD_CAM_EDM_DRO@egroups.com>
Date: Sunday, October 01, 2000 4:29 PM
Subject: Re: [CAD_CAM_EDM_DRO] Stepper Motor

>Thanks Dan,
>
>This motor was one of a batch I bought from you, so you should know. Do you
>happen to know the voltage?
>
>Thanks also to Carey, I will checkout the URL, don't know why my system
>couldn't find the English site.
>
>Regards,
>
>Terry
>
>
>
>> Those are 1.9A unipolar 126 0z in or 1.36A bipolar series and 160 oz

in.

>> In MAE motors the first 3 digits are the step per rev Thus HY200. The

last

>> three digits are the current 190 = 1.9A the middle 4 digits indicate the
>> frame size (22) really nema 23 and the 32 indicates the length and number
>of
>> stacks. Usually they are 8 wires.
>> Dan
>
>
>
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems, for CAD, CAM, EDM, and DRO.

>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@egroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
>List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
>Moderator: jmelson@... [Moderator]
>URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
>FAQ: http://www.ktmarketing.com/faq.html
>bill,
>List Manager
>
>