Re: [CAD_CAM_EDM_DRO] Bill, Welcome back!

In a message dated 10/2/00 10:02:35 AM Mountain Daylight Time,
dgehlsen@... writes:

<< I can tell that you are back. The adds have disappeared. Just
make sure that the "Year" started with the end of the adds,
not with the payment date. >>

Lots of luck on that, as long as it took to get them removed, imagine the
problems trying to get that done. I have still never received any answers to
any emails sent to them. We have enough for next year, with a small balance
for the following year in the remove add fund.
I have been reading all the posts, and see that you were all good boys, so
mommy can relax............grin.
I went to a boat show in Saint Louis, it was good but not as good as I
wanted, but that is life. Then went to PRIME< and had a good time there and
maxed out the credit card, but no new models this year. Visited an 80 year
old friend in SLC, and cried, he had the remains of about 30 nice steppers,
hanging on his wall, had torn them apart for the magnets, in the future he
will keep them for me instead of tearing them apart.
Put lots of miles on the van slept in it several nights, several 14 hour
sessions, run-in with the law and was detained, fortunately they soon
realized that I was not there man.
Met several members of the group at PRIME, had dinner with Alan Marconett,
KM6VV, and his wife Carol, a most enjoyable evening.
I think we will probably pick up a few new members from PRIME.
My most successful purchase was an end plate for my PRAZZI lathe, mine was
made of fibre and broken, and picked up a like new one, made of aluminum,
factory replacement. Needless to say that made my day.
End of report, very glad to be home.
bill