Re: [CAD_CAM_EDM_DRO] MiniRobo
Posted by
Dennis Bohlke
on 2000-10-24 14:38:01 UTC
> You could look at the method I am using on my little miller to support thethe
> leadscrews. I am using the ball bearings that are made for the ends of
> old Hoover Junior vacuum cleaner. They are a hardened steel cup for theof
> outer race and a shaped inner race which provide both end thrust and a
> self-aligning capability. I have popped a couple in a tube inner races
> facing, with a spacer collar which is fixed to the leadscrew between them.
> A screwed end cap on the tube adjusts endshake and is secured with a blob
> paint - on my machine it has given me undetectable backlash and freeSounds like a good method. I hadn't thought about vacuum cleaner bearings.
> movement for less than half the price you quote, and that was buying the
> bearings retail.
>
> Ian
I have thought about using ball bearings for front wheels of bicycles.
Sounds like you got the race with the balls from the vacuum cleaner.
Dennis
Discussion Thread
Dennis Bohlke
2000-10-23 12:11:15 UTC
[CAD_CAM_EDM_DRO] MiniRobo
Ian Wright
2000-10-24 02:18:38 UTC
Re: [CAD_CAM_EDM_DRO] MiniRobo
Dennis Bohlke
2000-10-24 14:38:01 UTC
Re: [CAD_CAM_EDM_DRO] MiniRobo
Ian Wright
2000-10-24 15:20:48 UTC
Re: [CAD_CAM_EDM_DRO] MiniRobo