CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Servo systems (was: re:cleaning, lovejoy, black box tach....)

Posted by dave engvall
on 2000-11-30 08:01:43 UTC
Jon Elson wrote:

>
> I'm getting great performance at 1 KHz from the CNC control, but
> about 3-4 KHz bandwidth on the velocity loop.

So what do you suppose is the real small signal bandwidth of the system you are controlling? This may not be correct thinking but
for instance if you feed the servo a 1 mm pk to pk sine wave ... where does it roll off?

Dave

Discussion Thread

Jon Elson 2000-11-29 21:48:21 UTC Re: [CAD_CAM_EDM_DRO] Servo systems (was: re:cleaning, lovejoy, black box tach....) dave engvall 2000-11-30 08:01:43 UTC Re: [CAD_CAM_EDM_DRO] Servo systems (was: re:cleaning, lovejoy, black box tach....) Jeff Barlow 2000-11-30 18:55:21 UTC Re: [CAD_CAM_EDM_DRO] Servo systems (was: re:cleaning, lovejoy, black box tach....)