CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Extra Small stepper motors

on 2000-12-18 16:14:50 UTC
Have you looked at the head positioning drive on a computer disk drive?

>:) Might be too small! The ball screw and the turret screws I plan on
>using for these functions will be 3/16" or 1/4" diameter. Motor sizes about
>1" diameter or slightly less would be ideal. I'd like to keep the length
>(for the compound driver) as short as possible to allow maximum angular
>rotation without having the spindle hit the part. Yep....this unit can use
>either tool bits or rotating spindles.
>
>Smoke
>
>-----Original Message-----
>From: Tim Goldstein <timg@...>
>To: CAD_CAM_EDM_DRO@egroups.com <CAD_CAM_EDM_DRO@egroups.com>
>Date: Sunday, December 17, 2000 3:21 PM
>Subject: RE: [CAD_CAM_EDM_DRO] Extra Small stepper motors
>
>
>>Smoke,
>>
>>Any hints as to what real small would be?? I have a few stepper motors that
>>are about 1/4" diameter and 3/8" or so long. Small enough??
>>
>>Tim
>>[Denver, CO]
>>
>>>
>>> I'm trying to shoehorn a lathe slide/compound unit onto a small
>>> lathe. I'd like to be able to control this via CNC. Anyone know of
>>> some really small stepper motors I can use for this? A source for
>>> purchase as well as design dimensions would help as well.
>>>
>>> Thanks, Smoke
>>> FAQ: http://www.ktmarketing.com/faq.html
>>
>>
>>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
>discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>>
>>Addresses:
>>Post message: CAD_CAM_EDM_DRO@egroups.com
>>Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
>>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
>>List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
>>Moderator: jmelson@... [Moderator]
>>URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
>>FAQ: http://www.ktmarketing.com/faq.html
>>bill,
>>List Manager
>>
>>
>>
>
>
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
>discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@egroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
>List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
>Moderator: jmelson@... [Moderator]
>URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
>FAQ: http://www.ktmarketing.com/faq.html
>bill,
>List Manager

Discussion Thread

Gordon Robertson 2000-12-17 14:06:54 UTC Extra Small stepper motors Tim Goldstein 2000-12-17 14:20:15 UTC RE: [CAD_CAM_EDM_DRO] Extra Small stepper motors Smoke 2000-12-17 14:43:24 UTC Re: [CAD_CAM_EDM_DRO] Extra Small stepper motors Heuver, Brad (B.R.) 2000-12-18 10:02:10 UTC Re: Extra Small stepper motors ballendo@y... 2000-12-18 14:21:50 UTC re:Extra Small stepper motors Smoke 2000-12-18 14:46:00 UTC Re: [CAD_CAM_EDM_DRO] re:Extra Small stepper motors Dick Ganderton 2000-12-18 16:14:50 UTC Re: [CAD_CAM_EDM_DRO] Extra Small stepper motors Smoke 2000-12-18 16:19:00 UTC Re: [CAD_CAM_EDM_DRO] Extra Small stepper motors