Re: Repost: Successful Gecko G320 servo applica tions

Thanks for the information

--- In CAD_CAM_EDM_DRO@egroups.com, "Dan Mauch" <dmauch@s...> wrote:
> Nice picture of your servo motor mounting plate.
> I took a different approach since I have several cnc machines. I
made motor
> mounts with slots for the mounting screws and for the motors male
fit. This
> gives about 1/4" of adjustment so you don't need a tensioner.
> Dan
> -----Original Message-----
> From: Dan Eaton <dan.eaton@c...>
> To: CAD_CAM_EDM_DRO@egroups.com <CAD_CAM_EDM_DRO@egroups.com>
> Date: Tuesday, January 02, 2001 8:57 PM
> Subject: [CAD_CAM_EDM_DRO] Re: Repost: Successful Gecko G320 servo
applica
> tions
>
>
> >--- In CAD_CAM_EDM_DRO@egroups.com, "Phat Ho" <phat.ho@n...> wrote:
> >> Hi Tim
> >>
> >> About the Camtronics servo motor, do we need special
> >> pulleys,belt and mounting to fit Nema34 size on the ShopTask
> >> (Eldorado). Do you have the drive spec.
> >> I am about to duplicate what you did (ball screws,CNC,DRO) on a
new
> >SM
> >> Eldorado when it arrives (is it SM2000 ?).
> >
> >I just got done installing a Camtronics servo motor on the Y axis
of
> >my ShopTask. I documented what I did on my web page if your
curious.
> >
> >http://home.swbell.net/eatond/ydrive.html
> >
> >At some point I may have to go back and look at rigging up a way to
> >tension the belt. The belt fit isn't loose but it's not as tight as
> >it could be either.
> >
> >Dan Eaton
> >
> >