Re: New FAQ

As a fairly new member of this list and also a relative newby to the
world of CAD/CAM in general, let me tell you I really appreciate
your work on the FAQ page. I'm sure I will be spending a LOT of
time there as I delve into this fascinating aspect of what has already
been 20 years of the wonderful hobby of home shop machining.

I am just beginning to gather the components needed to convert my
RF-30 to CNC, and would love to hear from others who have
completed or are working on a similar project.

R/L

-----Original Message-----
From: Jon Elson <jmelson@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Monday, July 26, 1999 10:31 PM
Subject: Re: [CAD_CAM_EDM_DRO] New FAQ

>From: Jon Elson <jmelson@...>
>
>I have started building the CAD_CAM_EDM_DRO FAQ page, but
>it is far from done. Please send comments, suggestions, report errors,
>etc. to me at jmelson@...
>
>The web home page is at http://206.19.206.56/cadfaq.htm
>
>Please don't, however, report dead links, as there are quite a few of them
>at present! I will try to add a few files a day to fill out all the links

that don't

>go anywhere right now.
>
>Thanks to Tim Goldstein for providing the resources to host this web FAQ!
>
>Jon
>
>
>--------------------------- ONElist Sponsor ----------------------------
>
>ATTN ONELIST USERS: stay current on the latest activities,
>programs, & features at ONElist by joining our member newsletter at
>
>------------------------------------------------------------------------
>Welcome to CAD_CAM_EDM_DRO@...,an unmodulated list for the

discussion of shop built systems in the above catagories.

>To Unsubscribe, read archives, change to or from digest.
>Go to: http://www.onelist.com/isregistered.cgi
>Log on, and you will go to Member Center, and you can make changes there.
>bill,
>List Manager
>