Re: [CAD_CAM_EDM_DRO] EMCLIST

----- Original Message -----
From: dave engvall <dengvall@...>
To: CAD <CAD_CAM_EDM_DRO@egroups.com>; Ian Wright
<Ian@...>; ray henry <rehenry@...>; proctor
<proctor@...>; xfa <xfa@...-stuttgart.de>; b.eding
<b.eding@...>; mo <mo@...>; f.debeer
<f.debeer@...>; anders.blix <anders.blix@...>; instel
<instel@...>; paul.corner <paul.corner@...>; loeka
<loeka@...>; dslav <dslav@...>; dafkite
<dafkite@...>; tgoldstein <tgoldstein@...>; dfalck
<dfalck@...>; psbax <psbax@...>; esccmail
<esccmail@...>; clintback <clintback@...>; dholness
<dholness@...>; scalione <scalione@...>; stephentate
<stephentate@...>; hess <hess@...>; quatsein
<quatsein@...>; johnm <johnm@...>; h <h@...>; emc
<emc@...>
Sent: Sunday, January 21, 2001 8:03 PM
Subject: [CAD_CAM_EDM_DRO] EMCLIST


>
> EMC friends,
>
> I am working on a revised list of EMC users,
> explorers, and friends. This
> information will be placed on http://linuxcnc.org
> with links between regional areas
> and information about the people in those
> regions.
> We appreciate all of your responses. If you feel
> that there are things asked
> that you would rather not reveal on the
> linuxcnc.org page, please leave those
> blank.
> We will not make any commercial use of this
> information but you should be aware
> that it will be available online.
> You are welcome to make up a name for the occasion
>
> as long as you are a real
> friend and provide a real e-mail address. Approx
> (nearest degree) gps coordinates are
> sufficient.
>
> Now for the work: < big grin>
> Please hit reply and fill in the information.
> The subject must remain the same for your
> reply to end up in the right place in my mailbox.
> Thanks in advance.
>
> Name: Amitabh Bachhawat
>
> City: Calcutta State, Prov, etc.West Bengal
>
> Country: India
>
> Nearest major city:
>
> e-mail address:chisel@...
>
> emc version:
>
> processor:
>
> machine(s)
>
> GPS coordinates:
> latitude: longitude:
>
> Comments:
>
> Future direction:
>
>
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
>
>