Dremel mount

Hi Alan and Ballendo,

Thanks for the great ASCII diagram. To see if I
followed correctly,
below is a modified diagram. Is that how the Dremel is
supposed
to be mounted?`

[The sherline head mount pin is .500dia. and 1.188 or
so long. So if
you use 1.00 thick alum you will need to screw the
dremel into the
mount before mounting it to the mill.(so you can turn
the dremel)]

Can't figure this out. Is it that the sherline head
mount pin juts
out 1.188 and will interfere with the screwing-in of
the dremel
after the jig has been attached to the Sherline?



|--1.00+ --|
__________ D
| | R
| | | E |
| | | M |
|| | | E |
-------------,| L |
-------------'| |
|| | |_____________________|
|----------| \'''''''''''''''''''/
| | \'''''''''''''''''/
| - | \'''''''''''''''/
| | | | \'''''''''''''/|-,
| | | | \'''''''''''/_|-'
|_____|_|__|___ ____\_________/_____ ___
| | | < | > |
| |_| < | > | .500
|____|___|__________<____|____>____| ___
|||
|||
/ \
|xxxxx|
|xxxxx|
|xxxxx|
\___/

[redesign to have the dremel "float" vertically and
use a
nosepiece to control the depth of the engraving into
the pcb.]

Don't understand. Please help.

NP

____________________________________________________________
Do You Yahoo!?
Get your free @... address at http://mail.yahoo.co.uk
or your free @... address at http://mail.yahoo.ie