Re: [CAD_CAM_EDM_DRO] Re: PLC's Microcontrollers, -PLC's

The Logo is programmed by logical blocs. That you scroll through and
select the options and set the parameters. The unit has 4 directional buttons
set and reset. And a small LCD display with 4 lines.
There are including versions with profibus conection to use it as a slave device.
Programing it with the PC is more confortable as by hand. And there you can simulate the program.
This toy wouldn't let you enter a program that is incomplete.
When you need to use a loop you have to use a marker otherwise it will not accept the
conection.

Good Luck
Sven Peter



davemucha@... wrote:

> What type of operating language do they use?
> Do you have a URL for it ?
>
> --- In CAD_CAM_EDM_DRO@y..., "Sven Peter, TAD S.A." <peteryco@r...>
> wrote:
> > Another cheap mini controler is the Siemens Logo that
> > (I mentioned it a few weeks ago). The versions 12/24..(VDC).have 2
> analog 0-10VDC
> > inputs. the 6 Input 4 output costs about 150$ and the 12 Input 8
> output
> > costs about 180$ and they can be programmed directly.
> > Who played once with one will love it for small automation projects
> like automatic saws etc.
> >
> > Good Luck
> > Sven Peter
> >
> > machines@n... wrote:
> >
> > > --- In CAD_CAM_EDM_DRO@y..., "Doug Harrison" <prototype@c...>
> wrote:
> > > > > I Saw this post on microcontrollers, the problem is that you
> > > cannot
> > > > > really get a PLC for a 100 bucks.
> > > >
> > > > Automation Direct DL-05 PLC.
> > > > 8 inputs
> > > > 6 outputs
> > > > 2K program memory
> > > > 4K data memory
> > > > 4 PID loops
> > > > Various AC/DC powered options
> > > > Built-in 24V supply
> > > > $99
> > > > Programming software - $99
> > > >
> > > > >
> > > We use some small PLC's from IMO here in the UK. IMO are only
> agents
> > > and I suspect that they are Fugi <sp> in origin, their invertors
> are.
> > > These come complete with programming CD and link cable for about
> 85
> > > UKP [ $127 ] about the same spec as the DL-05 above so shop around
> > > for deals.
> > >
> > > John Stevenson
> > > Nottingham, England.
> > >
> > > Welcome to CAD_CAM_EDM_DRO@e...,an unmoderated list for the
> discussion of shop built systems, for CAD, CAM, EDM, and DRO.
> > >
> > > Addresses:
> > > Post message: CAD_CAM_EDM_DRO@y...
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > > Moderator: jmelson@a... timg@k... [Moderator]
> > > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > bill,
> > > List Manager
> > >
> > > FAQ: http://www.ktmarketing.com/faq.html
> >
> >
> > [Non-text portions of this message have been removed]
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html

[Non-text portions of this message have been removed]