re: two sided tape was Holding thin sheet
Posted by
ballendo@y...
on 2001-02-20 20:41:11 UTC
Joe,
I'm not Jon, but many sign shops use "anchor" brand two sided tape
with their cnc routers... Looks like masking tape. Mush easier to re-
use and parts release more easily than carpet tape. Does NOT do well
with any solvents/ cutting fluids!!! But you're prob'ly cutting dry,
anyway.
Hope this helps.
Ballendo
P.S. It's available in different widths. Use of 1/2 and 3/4 is
common. SOMETIMES 1 inch makes sense.
I'm not Jon, but many sign shops use "anchor" brand two sided tape
with their cnc routers... Looks like masking tape. Mush easier to re-
use and parts release more easily than carpet tape. Does NOT do well
with any solvents/ cutting fluids!!! But you're prob'ly cutting dry,
anyway.
Hope this helps.
Ballendo
P.S. It's available in different widths. Use of 1/2 and 3/4 is
common. SOMETIMES 1 inch makes sense.
>Jon,Jon Anderson wrote:
> What brand/type of tape did you use?