Re: [CAD_CAM_EDM_DRO] Re: servo motor sources

CB

Thanks for the help. I forgot about my reid tool catalog. I'll check it.
Tom Eldredge

----- Original Message -----
From: <carlcnc@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, March 02, 2001 2:33 PM
Subject: [CAD_CAM_EDM_DRO] Re: servo motor sources


> --- In CAD_CAM_EDM_DRO@y..., "Tom Eldredge" <harmonyt@r...> wrote:
> > Gentlemen,
> >
> > "Could you recommend sources to look for new servo motors at a good
> price? I am looking for one with a continuous torque of about 10 inch
> pounds that I can mount an encoder to the rear of."
>
> Tom
> Servo Systems 800 922 1103 ext 19, you will gwt Jim,
> they have plenty of new/surplus units also Dan Mauch may have some
> >
> > "Also, I need to find a straight sleve bushing to reduce a drive
> pully ID from .625 " to .5"?]
>
> how about prcision drill bushings from reid Tool?
>
> CB
> >
> > Thanks for your help.
> > Tom Eldredge,
> >
> >
> > [Non-text portions of this message have been removed]
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>