Re: Homebrew digitiser

Hi Doug,

How ya do'in on the digitizer program? I haven't received anything.
Just thought I'd check.

Alan KM6VV

tnorris@... wrote:

>
> Doug,
>
> Meaning no disrespect, but I'm already doing it. Tonight I just put
> together my 2nd prototype for Alan Marconett to try, and a bare-bones
> disc of my software (NO SUPPORT, NO DOCS!). It's about as beta as
> beta-can-get but I think it would be best for someone outside of
> myself to test the probe + software in a real-world environment. Now
> if he'd just email me his address, it's ready to go!
>
> The cool thing is that the probe won't let him mess up. The software
> will command an ALL STOP if it gets outside of parameters (and will
> stop even if things go goofy INSIDE params). Alan will also be
> getting my MaxNC (any version) end-of-program hardware shut off. It
> doesn't just kill the spindle motor (1st), it can (optionally) kill
> the power to the entire MaxNC machine. I call that a true End-Of-
> Program command <grin>.
>
> Anyways, it's still in beta so I'll let him give it a whirl and
> report to the group.
>
> Back to my work trying to machine a 3-d half-sphere in UHMW plastic
> (.05" across). <grin>
>
> Tracy Norris
>
> >
> > > I am trying to design/build a digitiser - there aren't many
> > > affordable options here in Australia. Has anyone got any info,
> > > designs, tips or know of kits that they would share with me. I'm
> > > working with an area of approx 500mm x 350mm x 150mm.
> >
> > I'm working on the digitizer probe, and so are some others.
> > They all work the same way (a signal is sent as a "touch probe"
> > contacts the object surface), but the point is moot until some
> > compatable software is added to some existing GCode interpreters.
> >
> > I believe MaxNC software supports digitizing, and Doug Yeager's
> > CNC_Pro has a feed_hold line support.
> >
> > I'd suggest getting to work on your XYZ machine, and in six months
> > when you're done the basic machine, there might be some digitizing
> > options for you to consider at that time.
> >
> > Doug Fortune
> > http://www.cuug.ab.ca/~fortuned/cncKITS_faq.html
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html