Stepper Motor Sources??
Posted by
jh1221@a...
on 2001-03-08 05:48:51 UTC
Hello Again Everyone, I am still moving forward on my Bridgeport CNC
conversion, and am now looking at stepper motors. Does anyone know of
some sources that sell the higher torque motors? I don't know what
size motors I plan on using yet, probably somewhere between 700oz and
1000oz. I am using Gecko drives, so the amp rating for the motors
can't be more than 7 amps. Also while we're talking about it, would
3/4" belts be ok for driving the screws or should I use 1" belts?
Thanks again for all the help; John Hudak
conversion, and am now looking at stepper motors. Does anyone know of
some sources that sell the higher torque motors? I don't know what
size motors I plan on using yet, probably somewhere between 700oz and
1000oz. I am using Gecko drives, so the amp rating for the motors
can't be more than 7 amps. Also while we're talking about it, would
3/4" belts be ok for driving the screws or should I use 1" belts?
Thanks again for all the help; John Hudak