CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] (OT) vacuum pumps/torr to psi

Posted by jesse
on 2001-04-08 14:53:57 UTC
1 Torr = 1000 microns
Jesse

e.heritage@... wrote:

> Anybody know the torr to micron conversion? Or inches of water / mercury to
> microns?
>
> Thanks,
> John
>
> ----- Original Message -----
> From: "Tim Goldstein" <timg@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Sunday, April 08, 2001 7:54 PM
> Subject: RE: [CAD_CAM_EDM_DRO] (OT) vacuum pumps/torr to psi
>
> > Try http://www.geocities.com/CapeCanaveral/Station/2727/vachart1.jpg
> >
> > Tim
> > [Denver, CO]
> >
> > > Looking at vacuum pumps that are rated in Torr
> > > Busch site seems to use a different "value" versus any unit converter
> > > program I have found.
> > >
> > > 15 torr = ?psi
> > >
> > > CB
> > >
> > > FAQ: http://www.ktmarketing.com/faq.html
> >
> >
> > Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
> discussion of shop built systems, for CAD, CAM, EDM, and DRO.
> >
> > Addresses:
> > Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> > FAQ: http://www.ktmarketing.com/faq.html
> >
> > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
> >
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

carlcnc@s... 2001-04-08 11:14:48 UTC vacuum pumps/torr to psi Tim Goldstein 2001-04-08 11:53:28 UTC RE: [CAD_CAM_EDM_DRO] (OT) vacuum pumps/torr to psi e.heritage@b... 2001-04-08 12:26:44 UTC Re: [CAD_CAM_EDM_DRO] (OT) vacuum pumps/torr to psi jesse 2001-04-08 13:33:08 UTC Re: [CAD_CAM_EDM_DRO] vacuum pumps/torr to psi JanRwl@A... 2001-04-08 14:17:42 UTC Re: [CAD_CAM_EDM_DRO] vacuum pumps/torr to psi jesse 2001-04-08 14:53:57 UTC Re: [CAD_CAM_EDM_DRO] (OT) vacuum pumps/torr to psi