Re: [CAD_CAM_EDM_DRO] Chat room (_ICQ_)
Posted by
e.heritage@b...
on 2001-04-23 05:12:10 UTC
Hello list,
Why not give each other our ICQ numbers? Then whenever we're on we'll be
able to see who else is on from the group or open a chat room and let people
join as they come along. It'd cut down on the many hundreds of posts on here
that are sent every few days and we'd be able to talk in real time. From
what I've seen most of the replies come in the afternoon from America? I'm
sure there wouldn't be too much of a problem with the time differences. For
anyone who doesn't have it it's at www.icq.com and it takes about 4 minutes
to work out how to use. I'm number 76574387, if we go ahead with ICQ put a
star (*) before your name and that way we'll be able to sort the CNCer's
from the rest of the list.
Best wishes,
John (UK)
Why not give each other our ICQ numbers? Then whenever we're on we'll be
able to see who else is on from the group or open a chat room and let people
join as they come along. It'd cut down on the many hundreds of posts on here
that are sent every few days and we'd be able to talk in real time. From
what I've seen most of the replies come in the afternoon from America? I'm
sure there wouldn't be too much of a problem with the time differences. For
anyone who doesn't have it it's at www.icq.com and it takes about 4 minutes
to work out how to use. I'm number 76574387, if we go ahead with ICQ put a
star (*) before your name and that way we'll be able to sort the CNCer's
from the rest of the list.
Best wishes,
John (UK)
----- Original Message -----
From: <Area51tats@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, April 23, 2001 3:10 AM
Subject: Re: [CAD_CAM_EDM_DRO] Chat room
> I go into the 7x10minilathe group while I read my mail once in awhile
> someone will pop in and say HI. I read 9-10 different groups and I have
found
> that room to be the only one that gets used even a little bit. And I dont
> even own a 7x10 yet.
>
> Gerald
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>