Re: [CAD_CAM_EDM_DRO] John Stevenson

Hmmmm....one thing I don't have is too much money. Therefore the
DreaMachines I'm building MUST have a very efficient design.

Also based on Jankura's law, I hope everyone looks at these machines last.

:-)

Smoke

>Great observation Jerry.
>Too much money stunts creativity and actually leads to overspending and

inefficient designs.

>
>
>Carol & Jerry Jankura wrote:
>
>> Jankura's Law:
>>
>> If you don't have the money, several ideal units will be found, each one
>> being better than the last.
>>
>> Jankura's Corollary:
>>
>> A bulging wallet makes everything disappear
>>
>> -- Carol & Jerry Jankura
>> Strongsville, Ohio
>> So many toys, so little time
>>
>> -----Original Message-----
>> From: e.heritage@... [mailto:e.heritage@...]
>> Sent: Sunday, April 29, 2001 8:19 PM
>> To: cAD_CAM_EDM_DRO@yahoogroups.com
>> Subject: [CAD_CAM_EDM_DRO] John Stevenson
>>
>> I don't think I have the money to buy one out right now but I won't find

one

>> right away I don't think.
>> John H.
>>
>> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems, for CAD, CAM, EDM, and DRO.

>>
>> Addresses:
>> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
>> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>> Moderator: jmelson@... timg@... [Moderator]
>> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>> bill,
>> List Manager
>>
>> FAQ: http://www.ktmarketing.com/faq.html
>>
>> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems, for CAD, CAM, EDM, and DRO.

>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>FAQ: http://www.ktmarketing.com/faq.html
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>