Re: Pendant - Update
Posted by
Bob Bachman
on 1999-09-05 07:00:39 UTC
John,
A file I have with pc cable connections says the keyboard
connection is as follows:
Pin 1 - CLK OUT
Pin 2 - SERIAL OUT
Pin 3 - RESET OUT
Pin 4 - GND
Pin 5 - +5v
Hope this helps.
Bob
At 09:28 AM 9/5/99 GMT, you wrote:
A file I have with pc cable connections says the keyboard
connection is as follows:
Pin 1 - CLK OUT
Pin 2 - SERIAL OUT
Pin 3 - RESET OUT
Pin 4 - GND
Pin 5 - +5v
Hope this helps.
Bob
At 09:28 AM 9/5/99 GMT, you wrote:
>From: john@... (John Stevenson)should
>
>Just found a PS2 / 5 pin DIN convertor and done a pin out.
>On the PS2 plug it has 6 pins but the DIN only has 5.
>The black earth lead isn't connected on the 5 pin,not even to the case,
>it be ?5.30
>The other pins are, looking at the front of the DIN plug with the pins at the
>bottom.
>3 o'clock not connected
>5 o'clock black
>6 o'clock yellow
>8 o'clock red
>
>Actually the 5 and 8 o'clock pins are equally spaced so they are more like
>and 7.30discussion of shop built systems in the above catagories.
>Okay guys which are the clock and data pins.
>--
>Regards,
>John Stevenson
>Nottingham, England
>
>
>--------------------------- ONElist Sponsor ----------------------------
>
>GET WHAT YOU DESERVE! A NextCard Platinum VISA: DOUBLE Rewards points,
>NO annual fee & rates as low as 9.9 percent FIXED APR. Apply online today!
> <a href=" http://clickme.onelist.com/ad/nextcard5 ">Click Here</a>
>
>------------------------------------------------------------------------
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
>To Unsubscribe, read archives, change to or from digest.
>Go to: http://www.onelist.com/isregistered.cgi
>Log on, and you will go to Member Center, and you can make changes there.
>For the FAQ, go to http://www.ktmarketing.com/faq.html
>bill,
>List Manager
>
>
Discussion Thread
john@x...
1999-09-05 02:28:12 UTC
Pendant - Update
Bob Bachman
1999-09-05 07:00:39 UTC
Re: Pendant - Update
Jon Elson
1999-09-05 22:54:24 UTC
Re: Pendant - Update