RE: [CAD_CAM_EDM_DRO] Wiring the Gecko G201 Stepper Drive to Camt ronics DB25 Break out Board.
Posted by
Tim Goldstein
on 2001-06-22 14:59:44 UTC
Yes, I have a Camtronics junction board connected to a G210 (same connection
as a G201) and also to a G320. Works great and makes wiring much easier. How
it hooks up will depend upon the software you are using. I am using it with
EMC and for that the labels on the board for step and direction are
backwards (board was labeled for a different software package). To figure it
out all you have to do is use a continuity tester and trace the output pins
to the DB25 pins and then consult the documentation on your software.
Tim
[Denver, CO]
as a G201) and also to a G320. Works great and makes wiring much easier. How
it hooks up will depend upon the software you are using. I am using it with
EMC and for that the labels on the board for step and direction are
backwards (board was labeled for a different software package). To figure it
out all you have to do is use a continuity tester and trace the output pins
to the DB25 pins and then consult the documentation on your software.
Tim
[Denver, CO]
> -----Original Message-----http://docs.yahoo.com/info/terms/
> Hi! I would like to know if anyone has used the Camtronics
> DB25 break out
> board with the Gecko G201 Stepper Driver. I need to know the wiring
> schematics or hookups for connections on the board to the
> Gecko drive. If
> anyone can help me with these hookups it would be great help.
>
> Please email me at LAWGAB@... with any information.
>
> Thank you. Jay.
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Your use of Yahoo! Groups is subject to