CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Sherline - vs - Grizzley Mill Conversion (First Conversion)

on 2001-07-17 21:17:51 UTC
I also have both.

The Sherline is much MUCH easier to convert to CNC. So I'd suggest you go
that route to start with.

Then use the Sherline to make the parts you'll need to convert the Grizzly.
The Griz will do larger and heaver work than the Sherline
will.

later,
Larry E.

----- Original Message -----
From: "Alan Trest" <stickman@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, July 17, 2001 8:03 PM
Subject: [CAD_CAM_EDM_DRO] Sherline - vs - Grizzley Mill Conversion (First
Conversion)


> Much research and great advice from this list have left me with what
> probably should have been my first question of all.
>
> I have a Grizzley Mini-Mill and also a Sherline that I can convert.
> Considering Price to convert versus capability of the two machines.
>
> Which would the list consider a better first cnc conversion project.
> I primarily will be building Miniture IC engines. The largest will
> probably be something like Ron Colonna's Offy 270. Probably no
> projects will exceed this size.
>
> Thanks in advance for all view points.
>
> Alan Trest
> Pensacola, Fl
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Discussion Thread

Alan Trest 2001-07-17 19:03:48 UTC Sherline - vs - Grizzley Mill Conversion (First Conversion) Larry Edington 2001-07-17 21:17:51 UTC Re: [CAD_CAM_EDM_DRO] Sherline - vs - Grizzley Mill Conversion (First Conversion)