Re: [CAD_CAM_EDM_DRO] Best bag for the buck software for servo drivers ? (Gecko)

Mike,

You will need two programs. A program like cncpro to read the G code and
run your machine and another program like rams-software to read your dxf
file and create the tool path.

Bob Campbell
www.campbelldesigns.com

----- Original Message -----
From: <mmueller@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, July 20, 2001 2:12 PM
Subject: [CAD_CAM_EDM_DRO] Best bag for the buck software for servo drivers
? (Gecko)


> I'm about this close "--" to purchaseing a servo set up for my
> mill/drill CNC conversion. (Gecko's)
>
> The part that I am now struggling with is the software to get to make
> parts and run the servos.
>
> By day I'm a Pro/E user so drawing up the part is a no big deal.
> I'd like something that I could simply import my files into
> (iges,stl,dxf....etc) and plug into the computer running the CNC.
>
> Thanks,
>
> Mike Mueller
> Antioch, CA
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>