CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Another EDM Approach

Posted by Jon Elson
on 2001-07-30 11:20:44 UTC
Alexandre Guimarães wrote:

> Hi,
>
> > I had wondered whether it would be possible to pick up enough current for
> > sensing by wrapping a few turns of wire around the power wire to the
> > electrode and limiting the voltage on this by using a fast zener diode or
> > something.
>
> What about a hall-effect sensor ? At the currents involved it would be
> probably bery effective and best of all, completely isolated from the
> current path ! Allegro has some nice linear parts.

hall effect devices are pretty good for sensing currents, but they are not
fast. A bare hall device provides only a couple of mV of signal. Most
amplified hall devices would be slow to respond to the kinds of pulses
we are looking at. I think a current transformer might be a lot easier to
get working properly.

Jon

Discussion Thread

vrsculptor@h... 2001-07-29 19:32:03 UTC Another EDM Approach Jon Elson 2001-07-29 22:28:01 UTC Re: [CAD_CAM_EDM_DRO] Another EDM Approach Ian Wright 2001-07-30 02:07:19 UTC Re: [CAD_CAM_EDM_DRO] Another EDM Approach Alexandre Guimarães 2001-07-30 06:04:55 UTC Re: [CAD_CAM_EDM_DRO] Another EDM Approach Jon Elson 2001-07-30 11:13:25 UTC Re: [CAD_CAM_EDM_DRO] Another EDM Approach Jon Elson 2001-07-30 11:20:44 UTC Re: [CAD_CAM_EDM_DRO] Another EDM Approach Hugh Prescott 2001-07-30 14:07:33 UTC Re: [CAD_CAM_EDM_DRO] Another EDM Approach Ian Wright 2001-07-30 14:13:03 UTC Re: [CAD_CAM_EDM_DRO] Another EDM Approach Ian Wright 2001-08-01 05:45:51 UTC Re: [CAD_CAM_EDM_DRO] Another EDM Approach Jon Elson 2001-08-01 11:53:46 UTC Re: [CAD_CAM_EDM_DRO] Another EDM Approach M. SHABBIR MOGHUL 2001-08-01 21:07:31 UTC Re: [CAD_CAM_EDM_DRO] Another EDM Approach Ian Wright 2001-08-02 04:40:53 UTC Re: [CAD_CAM_EDM_DRO] Another EDM Approach Jon Elson 2001-08-02 10:12:07 UTC Re: [CAD_CAM_EDM_DRO] Another EDM Approach M. SHABBIR MOGHUL 2001-08-03 13:03:34 UTC Re: [CAD_CAM_EDM_DRO] Another EDM Approach