CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] DB9, DB15,DB25 cutout drawings / dimensions

Posted by Doug Fortune
on 2001-08-29 19:56:41 UTC
Alan Marconett KM6VV wrote:
>
> Hi Rich,
>
> Funny you should mention the 37's and 50's! Looks like I'm going to
> need them! Now if it's still PC to call them DB... ;>)
>
> Alan KM6VV
>
> "Rich D." wrote:
> >
> > One must widen your horizons someday.
> > I machine 9, 15, 25, 37 and 50 pin DB's frequently for customers.
> > > Mike
> > >
> > > beer@... wrote:
> > > >
> > > > Now, not to be a PITA, but in the interests of accuracy ( and for this
> > > > group, that shouldn't be a dirty word ), the only commonly used B sized
> > > > connector is a DB25.

When I posted those, it would have been extra effort to post just
the DB25's. The rest are there for completeness.

Yes, mostly we want just the DB25's because that is what the male and
female 25 pin parallel ports use. Usually male (on the cable) at
the computer end, and female (on the cable) at the far end, for purposes
of standardization and additional chaining of cables if required. And
of
course (for the newbies) we never talk about the Centronics parallel
connector because everyone generally uses the male and female DB25's.

Doug Fortune
http://www.cncKITS.com

Discussion Thread

Rich D. 2001-08-29 16:33:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: DB9, DB15,DB25 cutout drawings / dimensions Alan Marconett KM6VV 2001-08-29 16:57:42 UTC DB9, DB15,DB25 cutout drawings / dimensions Doug Fortune 2001-08-29 19:56:41 UTC Re: [CAD_CAM_EDM_DRO] DB9, DB15,DB25 cutout drawings / dimensions