Check out E.T.E. Useful Information
Posted by
wanliker@a...
on 2001-09-02 13:24:03 UTC
<A HREF="http://www.elec-toolbox.com/usefulinfo/3wstp-strt.htm">Click here: E.T.E. Useful Information</A>
http://www.elec-toolbox.com/usefulinfo/3wstp-strt.htm
Here is the schematic for hooking up a start stop station to a controller,
shows the 1,2, and 3 connections. If you are using line voltage for the
coil, just change the source to the input Lines, eliminating the transformer.
By using an Emergench Stop button that locks down you will drop and hold the
coil unengerized. Also if the source of the switching power drops out for
any reason, the system will not restart.
bill
[Non-text portions of this message have been removed]
http://www.elec-toolbox.com/usefulinfo/3wstp-strt.htm
Here is the schematic for hooking up a start stop station to a controller,
shows the 1,2, and 3 connections. If you are using line voltage for the
coil, just change the source to the input Lines, eliminating the transformer.
By using an Emergench Stop button that locks down you will drop and hold the
coil unengerized. Also if the source of the switching power drops out for
any reason, the system will not restart.
bill
[Non-text portions of this message have been removed]