RE: [CAD_CAM_EDM_DRO] EMC Control Panel

on 2001-09-06 13:28:46 UTC

THIS IS GREAT INFORMATION! I WAS PLANNING ON HACKING APART AN OLD KEYBOARD
AND SOLDERING MY OWN SWITCHES INTO IT.... HMMMM... COULD THE SAME THING BE
ACCOMPLISHED BY HACKING AN OLD KEYBOARD CIRCUIT BOARD, AND USING A KEYBOARD
'Y' WITH A GOOD KEYBOARD ON THE OTHER LEAD? (JUST IN CASE I NEED INPUT VIA A
KEYBOARD, IN ADDITION TO THE SWITCHES FOR EMC)
THANKS--- DAVE 'LO-TECH' LANTZ

-----Original Message-----
From: wscalione@... [mailto:wscalione@...]
Sent: Thursday, September 06, 2001 12:54 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] EMC Control Panel

John

Yes I will post some photos and how I did it once I get it
going. I just got the keyboard emulator 10 minutes ago
from UPS so I will try that sometime today. Got it from
http://www.hagstromelectronics.com/modules.html
I bought the KE-18 module, which allows connecting
a keyboard and the module at the same time. That is
essentially 2 keyboards, with your own switches connected
to the module to emulate key presses. The big problem
is the switches, The ones that I want to use are high
dollar (about $12.00 each!). I do not like those cheap
ones that don't click when you press them. I may stick
some cheap ones in there for now and continue my search
for matching the switches that I allready have. If anybody
sees any switches made by EAO cheap, let me know

Bill

> Now that's kul! Can we expect to see some kind of how-to on this in the
> future? What are you using?
>
> John Guenther
>

>

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread