Re: [CAD_CAM_EDM_DRO] Motor Mounting Brackets for Bridgeport Conversion

I'm in the process of casting some aluminum ones for a conversion to my
bridgeport clone.
These will be cast using the lost wax casting process.
At the moment I'm waiting for some ceramic shell material I've got on order
to be delivered.
As soon as it gets here, I should be able to get them cast within a couple
of weeks.

I can send you a sketch of the castings if you like. They should fit on
your machine.
They are designed for ease of motor mounting and adjustment.
If not, let me know and I can easily alter the wax pattern before casting
them if you'd like me to cast some for you.

I'm sure the price will be much less than $700, but you will have to machine
them to fit your machine.

Smoke

----- Original Message -----
From: <jjh122@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, September 06, 2001 5:37 PM
Subject: [CAD_CAM_EDM_DRO] Motor Mounting Brackets for Bridgeport Conversion


> Hi Everyone, I was just wondering if anyone knows of anybody who
> sells mounting brackets for mounting the stepper motors to the ends
> of the "X" and "Y" tables on a Bridgeport mill. I know that ah-ha
> sells them but I think they are around $700.00 (too much for me) or
> at least somewhere I can get some plans. Thanks; John
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>