Re: [CAD_CAM_EDM_DRO] terminal 7

Hi Peter:

I think disable should be thought of as Enable. If you disable the
drives they unlock and you can manually turn the motors. It is also a good
line to activate if an emergency stop is activated.
Art

Master5 Software
http://users.andara.com/~fenerty/master.htm

----- Original Message -----
From: <cadcamcenter@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, October 09, 2001 8:32 AM
Subject: [CAD_CAM_EDM_DRO] terminal 7


> Hi
>
> How does one use terminal 7 (disable) in the Gecko201A? Under what
> circumstances should one uses it?
>
> Thanks
>
> Peter
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>