CAD CAM EDM DRO - Yahoo Group Archive

Re: current set resistor

on 2001-10-10 00:03:13 UTC
--- In CAD_CAM_EDM_DRO@y..., mariss92705@y... wrote:
> Hi,
>
> The new drive has two, overlapping current ranges; 0.3A to 2A range
> and the original 1A to 7A range.
>
> For the 0.3A to 2A range use: R = (47,000 * I) / (2 - I)
>
> For the 1A to 7A range use: R = (47,000 * I) / (7 - I)
>
> The low range will yield 47K while the high range gives 8.2K for a
1A
> current set. Hope that clears things up.
>
> Mariss

Thanks. Very clear now. Missed that 2A and 7A.

Discussion Thread

cadcamcenter@y... 2001-10-08 16:54:16 UTC current set resistor Tim 2001-10-08 17:05:22 UTC RE: [CAD_CAM_EDM_DRO] current set resistor mariss92705@y... 2001-10-08 20:18:41 UTC Re: current set resistor cadcamcenter@y... 2001-10-08 20:57:59 UTC Re: current set resistor Dan Mauch 2001-10-09 10:22:00 UTC Stepper Motor Group Purchase cadcamcenter@y... 2001-10-09 16:35:59 UTC current set resistor mariss92705@y... 2001-10-09 18:33:04 UTC Re: current set resistor cadcamcenter@y... 2001-10-10 00:03:13 UTC Re: current set resistor