RE: RENISHAW PROBE BRIC_A_BRAK
Posted by
Michael Milligan
on 2001-10-21 06:31:52 UTC
All members
I have noticed that some are interested in CMMs and/or
3D digitising on milling machines.
About 8 years ago our small company ceased selling Renishaw
Probes and accessories with our software. It has taken me that
length of time to clear out the recesses of my Garage but the
demands of offspring who wish to hone their musical talent without
tormenting well liked neighbours has forced a clear up on me as
I move my kit to a smaller out building.
As a result of this clearup I now have various Renishaw parts
which are of no interest to me and which are available to the best bidder.
The parts are as follows :-
ITEM DESCRIPTION
____ ___________
1 1 Renishaw LP2 Probe, serial number on body D96170.
Appears to be in working order, may need to be calibrated.
2 1 Renishaw MP11 Machine tool probe. Renishaw PARTNO A/2045
This probe was designed for use with mahcine tools rather than
CMMs and contains its own Interface unit. The probe is in the
original box and comes complete with Handbook.
3 1 Renishaw MI5 Probe Interface Unit. PARTNO A/2019/7011.
Unused, still in box.
4 1 Renishaw MI5 Probe Interface Unit. Partno A/2019/7011.
Been in use, cable attached but no end connector on cable.
5 1 Set of Various sized Probe Stylii. Inch dimensions. In original
box.
6 1 half set of Various sized Probe Stylii. inch dimensions.
In original box.
7 1 Set of Various sized Probe Stylii. Metric dimensions. in original
box.
8 4 Probe Shank adapters. Renishaw Partno M/2063/7865
9 1 MA2 Probe holder kit.
Renishaw PARTNO A/2063/7868
The goods all appear to be in good order but are offered with no guarantee,
the purchaser would also pay for shipment costs. I would prefer if one
person
took the job lot but have no real objection to cherry picking.
For general measurement the user would need to write their own Macros to
suit the device being used, information on these macros may be available
from
Renishaw.
Machine Tool Digitising
_______________________
In terms of usage, from my memory - The LP2 probe can be fitted to the MA2
Probe holder and the MI5 interface unit is connected to the MA2. When the
LP2
probe is triggered a signal is read by the MI5 unit, the MI5 is also
connected
to the CNC control and it signals for the XYZ coordinates to be read and
output
(normally on an RS232 cable to a PC).
Regards to all
michael
I have noticed that some are interested in CMMs and/or
3D digitising on milling machines.
About 8 years ago our small company ceased selling Renishaw
Probes and accessories with our software. It has taken me that
length of time to clear out the recesses of my Garage but the
demands of offspring who wish to hone their musical talent without
tormenting well liked neighbours has forced a clear up on me as
I move my kit to a smaller out building.
As a result of this clearup I now have various Renishaw parts
which are of no interest to me and which are available to the best bidder.
The parts are as follows :-
ITEM DESCRIPTION
____ ___________
1 1 Renishaw LP2 Probe, serial number on body D96170.
Appears to be in working order, may need to be calibrated.
2 1 Renishaw MP11 Machine tool probe. Renishaw PARTNO A/2045
This probe was designed for use with mahcine tools rather than
CMMs and contains its own Interface unit. The probe is in the
original box and comes complete with Handbook.
3 1 Renishaw MI5 Probe Interface Unit. PARTNO A/2019/7011.
Unused, still in box.
4 1 Renishaw MI5 Probe Interface Unit. Partno A/2019/7011.
Been in use, cable attached but no end connector on cable.
5 1 Set of Various sized Probe Stylii. Inch dimensions. In original
box.
6 1 half set of Various sized Probe Stylii. inch dimensions.
In original box.
7 1 Set of Various sized Probe Stylii. Metric dimensions. in original
box.
8 4 Probe Shank adapters. Renishaw Partno M/2063/7865
9 1 MA2 Probe holder kit.
Renishaw PARTNO A/2063/7868
The goods all appear to be in good order but are offered with no guarantee,
the purchaser would also pay for shipment costs. I would prefer if one
person
took the job lot but have no real objection to cherry picking.
For general measurement the user would need to write their own Macros to
suit the device being used, information on these macros may be available
from
Renishaw.
Machine Tool Digitising
_______________________
In terms of usage, from my memory - The LP2 probe can be fitted to the MA2
Probe holder and the MI5 interface unit is connected to the MA2. When the
LP2
probe is triggered a signal is read by the MI5 unit, the MI5 is also
connected
to the CNC control and it signals for the XYZ coordinates to be read and
output
(normally on an RS232 cable to a PC).
Regards to all
michael