Re: [CAD_CAM_EDM_DRO] Re: Sherline Mill

I have the same Camtronics drivers with 160 oz-in steppers on all axes. It
works great. My backlash is 0.003" per axis and the software takes care of
it flawlessly.

Daniel J. Statman, Statman Designs
www.statmandesigns.com

----- Original Message -----
From: "Bill Blackburn" <blckburn@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, October 23, 2001 2:43 PM
Subject: [CAD_CAM_EDM_DRO] Re: Sherline Mill


> Hi Guys
>
> I have a Sherline Mill that I am converting to CNC. I have a couple of
> questions I hope somebody can answer for me.
>
> (1) I have 100 oz Steppers for X, Y and a 190 oz Steeper for Z. Will
> these work satisfactory with this size of Mill?
>
> (2) What about the lead screws that come with the Mill. Are these
> satisfactory for CNC work? Will backlash be a problem with this Factory
> screws?
>
> (3) I am planing to use a Camtronics 3Axis 2Amp Chopper Driver Board.
>
>
> Any comments would be greatly appreciated.
>
> Regards
> Bill
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>