Re: [CAD_CAM_EDM_DRO] Surplus Dealers?

Hi Bob!

We have lots of surplus rails... about 2000 feet of them!

The THK ones are mostly high profile four ball circuit
units. They are suitable for heavy duty metal cutting machines and I think
were oem for a K&T machining center.

We also have a good many IKO LWE 2 ball circuit rails. Most
customers are using these for routers.

All are new in factory cartons. The heavier duty THK units
cost a bit more than the IKO.

Size is from 15 mm to 45 mm 1 to 3 meters long.
Static load capacity is up to 8400 lb/ bearing. The rails
are typically packed with 2 bearings installed. We do have separate extra
bearing units as well.

Lately I have sold a good number of IKO 30mm x 2 m rails for routers. We are
down to only about 10 rails in this size.

I also have many SEM dc servo motors suitable for ballscrew
driven cnc machines. They are also new in factory cartons.

I use them on my own in house machines.

I took a look at your web site and it looks very nice. You seem to be using
the 80/20 aluminum extrusions for your plans.

With your customer base perhaps we could have some better prices.

Give me a call at (706) 212-0242 or I can try to call you.

Thanks,

Les


Leslie Watts
L M Watts Furniture
Tiger, Georgia USA
http://www.rabun.net/~leswatts/wattsfurniturewp.html

----- Original Message -----
From: "Bob Campbell" <bob@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, October 23, 2001 6:36 PM
Subject: Re: [CAD_CAM_EDM_DRO] Surplus Dealers?


> Leslie,
>
> I am interested in some of the THK rails and bearings that you may have.
I
> am always looking for rails and bearings for my customers that want to
build
> a cnc router from my plans. I have been buying a number of THK rails and
> bearings on ebay.
>
> Bob Campbell
> www.campbelldesigns.com
>
> ----- Original Message -----
> From: "Les Watts" <leswatts@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Tuesday, October 09, 2001 7:29 PM
> Subject: Re: [CAD_CAM_EDM_DRO] Surplus Dealers?
>
>
> > Well, I'm not in the Dallas area but I do have servos, THK and
> > IKO linear rails, and a few ballscrews. They are all surplus new in
> factory
> > cartons and while not cheap I usually offer them at about 25 cents on
the
> > dollar as compared to distributors
> > pricing.
> >
> > They are used on the higher quality production cnc routers.
> > I use them on my in house machines and generally don't
> > advertise them much... but... well-you asked!
> >
> > Leslie Watts
> > L M Watts Furniture
> > Tiger, Georgia USA
> > http://www.rabun.net/~leswatts/wattsfurniturewp.html
> > ----- Original Message -----
> > From: <fab-it@...>
> > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Sent: Tuesday, October 09, 2001 12:30 PM
> > Subject: [CAD_CAM_EDM_DRO] Surplus Dealers?
> >
> >
> > > Looking for surplus dealers in the Dallas/FtWorth area. I am looking
> > > for mechanical/electrical parts for my first cnc router project, such
> > > as servos/steppers, bearings, guides, etc...
> > >
> > > Thanks in advance, Kenny
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > >
> > > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > > Moderator: jmelson@... timg@... [Moderator]
> > > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > bill,
> > > List Manager
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> > >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>