Re: [CAD_CAM_EDM_DRO] Threading on a lathe with EMC
Posted by
ccs@m...
on 2001-10-29 14:08:00 UTC
> In a small way, I contribute to the EMC development - Mainly breaking and bugPaul, from my reading of the code I think the major challenge is
> hunting. But I do have a lathe that I'm in the process of hooking up to an
> EMC control.
> Every spare moment I can spare is spent studying the EMC source code - I am
> sure threading and feed per rev (they are both basically the same problem)
> can be developed. Allready have a few stratagies worked out in the back of my
> mind, and once I've figured out just how to put them in to code, I'll be
> doing some testing.
figuring out where "reactive" thread synchronization should be
implemented. Once it's clear what component to modify, it's 'simply' a
task of doing it and testing;-) But as the modifications are so
fundamental, I've hesitated to jump in and try may hand at it when
others may have more insight into where the changes are best made
to keep in the spirit of the original architecture.
"Proactive" threading with a servoed spindle is of course much simpler
software wise but requires more equipment on the machine, which makes
it less usefull to the average hobbyist. Software only has to be
written once - hardware has to be duplicated on every machine.
Chris
Discussion Thread
Ethan Vos
2001-10-29 09:11:42 UTC
Threading on a lathe with EMC
ccs@m...
2001-10-29 09:25:58 UTC
Re: [CAD_CAM_EDM_DRO] Threading on a lathe with EMC
Ethan Vos
2001-10-29 09:34:57 UTC
RE: [CAD_CAM_EDM_DRO] Threading on a lathe with EMC
glee@i...
2001-10-29 09:39:36 UTC
Re: [CAD_CAM_EDM_DRO] Threading on a lathe with EMC
ccs@m...
2001-10-29 10:04:45 UTC
Re: [CAD_CAM_EDM_DRO] Threading on a lathe with EMC
Ethan Vos
2001-10-29 10:09:59 UTC
RE: [CAD_CAM_EDM_DRO] Threading on a lathe with EMC
ccs@m...
2001-10-29 10:25:04 UTC
Re: [CAD_CAM_EDM_DRO] Threading on a lathe with EMC
currinh@O...
2001-10-29 11:43:19 UTC
Re: Threading on a lathe with EMC
ccs@m...
2001-10-29 12:11:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Threading on a lathe with EMC
currinh@O...
2001-10-29 12:31:53 UTC
Re: Threading on a lathe with EMC
ccs@m...
2001-10-29 13:05:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Threading on a lathe with EMC
Paul
2001-10-29 13:52:04 UTC
Re: [CAD_CAM_EDM_DRO] Threading on a lathe with EMC
ccs@m...
2001-10-29 14:08:00 UTC
Re: [CAD_CAM_EDM_DRO] Threading on a lathe with EMC
thscarince@h...
2001-10-29 14:15:00 UTC
Re: Threading on a lathe with EMC
Paul
2001-10-29 14:39:16 UTC
Re: [CAD_CAM_EDM_DRO] Threading on a lathe with EMC
glee@i...
2001-10-29 14:52:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: Threading on a lathe with EMC
Garry & Maxine Foster
2001-10-30 03:55:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Threading on a lathe with EMC
Rose, Gary
2001-10-30 05:12:40 UTC
Re: Threading on a lathe with EMC
thscarince@h...
2001-10-30 05:55:49 UTC
Re: Threading on a lathe with EMC
Garry & Maxine Foster
2001-10-30 06:57:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Threading on a lathe with EMC