Re: DXF converters, was: Excaliburcnc by XCAM

Hi Tauseef,

Yup, 'been using it for years to test out DXF code, and determine HOW
Gcode should be interpreted!

I understand there's a new version with an updated signal generator
coming out.

Alan KM6VV

tauseef wrote:

>
> hey guys,
> thanks for the interesting posts.
> Chris for 2D I have used Ace Converter with much sucess. Its free and
> you can use it forever..www.yeagerautomation.com. I however now will
> use flashcut www.flashcut.com for my g-code 2D conversion as I can
> put in a different feedrate (plunge rate) for the Z axis and XY axis,
> a huge improvement over Ace in my opinion. But "there" free so there
> both GREAT!
>
> later
> tauseef
>
> --- In CAD_CAM_EDM_DRO@y..., rab@r... wrote:
> > You could also check out GMAX at
> > http://www.discreet.com/products/gmax/
> > , which is a free, but very limited version of 3D Studio MAX. I've
> > written some scripted functions for G-Code I/O and toolpath
> > generation for 3D Studio MAX which I use along with Master5 CNC and
> a
> > converted Taig mill.
> > These scripts mostly also work with GMAX if you want to try them,
> but
> > I'm afraid that GMAX can't make use of the Active-X control that
> > Art's got for Master5.
> > There's also a script for DXF import to GMAX at
> > http://gmax.digitalarenas.com
> > You can't import an STL file, but it should be possible to write a
> > script for that.
> >
> > Rab,
> >
> > http://www.rainnea.com/cnc.htm
> >
> > http://www.rainnea.com/maxscript.htm
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/