CAD CAM EDM DRO - Yahoo Group Archive

Re: Digest Number 18

Posted by Dan Mauch
on 1999-05-21 09:04:02 UTC
I used the linear encoder strips from us digital with Tom's 4 axis dro. Zero
backlash! Great for the price. I made a special hopusing to fully enclose
the linear strip. I will post pictures later.
Dan
-----Original Message-----
From: James Eckman <fugu@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Friday, May 21, 1999 8:44 AM
Subject: Re: [CAD_CAM_EDM_DRO] Digest Number 18


>From: James Eckman <fugu@...>
>
>> From: "Matt Shaver" <mshaver@...>
>> Subject: Re: Position Readout Question and Introduction
>> There remains the
>> linear encoder/mylar scale system available from http://www.usdigital.com
>> which, despite its peculiar native resolution, is being successfully used
>> by some other list members to achieve a do-it-yourself DRO setup.
>
>This does look to be the least expensive DRO setup I've seen for home
>brew
>purposes. Thanks
>
>Jim Eckman
>
>------------------------------------------------------------------------
>What do lizards and rock music have in common?
>http://www.onelist.com
>They both have communities at ONElist. Find yours today!
>------------------------------------------------------------------------
>welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the
discussion of shop built systems in the above catagories.
>

Discussion Thread

James Eckman 1999-05-21 08:42:10 UTC Re: Digest Number 18 Dan Mauch 1999-05-21 09:04:02 UTC Re: Digest Number 18