Re: Linear motion design Q
Posted by
hotaluminum
on 2001-12-12 15:23:21 UTC
Hi,
I'm trying to picture in my mind how the bearing and CRS are mounted
and used in ref to each other. Got any pictures or a diagram?
That was my next problem, the Y-Axis. I believe I have my X-Axis
settled as to form and function.
I am working on a moving gantry type of CNC machine.
I'm trying to picture in my mind how the bearing and CRS are mounted
and used in ref to each other. Got any pictures or a diagram?
That was my next problem, the Y-Axis. I believe I have my X-Axis
settled as to form and function.
I am working on a moving gantry type of CNC machine.
>The main
> I have built the gantry beam for a CNC router setup using CRS rails.
> body of the gantry is an aluminum hollow box section (from ascrapyard, I think
> it is 5" square with 1/16" walls). On each of three faces, I havemounted
> 2.5x0.25" CRS rails. They bolt to the box section with numerousbolts. Each of
> these rails has three roller bearings running on it (two on oneside, one on the
> other), and each only provides positioning in one plane. So if theCRS flexes
> across its thin dimension it doesn't matter, and the thick dimensionis both
> intrinsically stiff, and also further stiffened by being bolted tothe box
> section.
>
>
Discussion Thread
y2patmat
2001-12-12 10:49:15 UTC
Linear motion design Q
hotaluminum
2001-12-12 12:05:57 UTC
Re: Linear motion design Q
ccs@m...
2001-12-12 12:20:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Linear motion design Q
hotaluminum
2001-12-12 12:41:15 UTC
Re: Linear motion design Q
y2patmat
2001-12-12 12:52:50 UTC
Re: Linear motion design Q
Kevin P. Martin
2001-12-12 12:54:53 UTC
RE: [CAD_CAM_EDM_DRO] Re: Linear motion design Q
hotaluminum
2001-12-12 15:23:21 UTC
Re: Linear motion design Q
Doug Fortune
2001-12-12 21:35:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: Linear motion design Q
Kevin P. Martin
2001-12-14 07:55:34 UTC
RE: [CAD_CAM_EDM_DRO] Re: Linear motion design Q
wanliker@a...
2001-12-14 11:52:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Linear motion design Q
kpemartin
2001-12-16 08:10:50 UTC
Re: Linear motion design Q