[CAD_CAM_EDM_DRO] Follow-up (Lindsay DRO Software)
Posted by
Robert Bachman
on 2001-12-24 06:49:25 UTC
Thanks for the responses and thanks Graham for the source code.
The reason for the request is to see if it's possible to change the code
to look at the input bits of the non-bidirectional printer ports on older
laptops. I picked up a couple of 386 mono laptops at MSU surplus
for $20 each. The printer ports are 4 bit monodirectional and the data
pins/bits are only ouput. There are however other pins and bits that
accept input. If the software can be changed to read these bits we will
be able to use these old cheap laptops for DRO.
Any help in the programing area would be appreciated as my programing
ability is limited to quickbasic and early visual basic.
Thanks,
Bob
PS. Art, Yes I would like the 5.0 version too.
!Art wrote:
The reason for the request is to see if it's possible to change the code
to look at the input bits of the non-bidirectional printer ports on older
laptops. I picked up a couple of 386 mono laptops at MSU surplus
for $20 each. The printer ports are 4 bit monodirectional and the data
pins/bits are only ouput. There are however other pins and bits that
accept input. If the software can be changed to read these bits we will
be able to use these old cheap laptops for DRO.
Any help in the programing area would be appreciated as my programing
ability is limited to quickbasic and early visual basic.
Thanks,
Bob
PS. Art, Yes I would like the 5.0 version too.
!Art wrote:
>Bob,
>I also have a beta version 5.0 of the program and its source code if you
>are interested.
>
>
Discussion Thread
Sven Peter
2001-12-22 05:46:35 UTC
digital camera again
chewy8833
2001-12-22 06:25:21 UTC
Re: digital camera again
goat
2001-12-22 08:26:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: digital camera again
Marcus & Eva
2001-12-22 08:34:46 UTC
Re: [CAD_CAM_EDM_DRO] digital camera again
JanRwl@A...
2001-12-22 10:11:24 UTC
Re: [CAD_CAM_EDM_DRO] digital camera again
JanRwl@A...
2001-12-22 10:14:03 UTC
Re: [CAD_CAM_EDM_DRO] digital camera again
Alan Marconett KM6VV
2001-12-22 12:20:11 UTC
Re: [CAD_CAM_EDM_DRO] digital camera again
Bob Bachman
2001-12-23 18:46:28 UTC
[CAD_CAM_EDM_DRO] Lindsay DRO Software
Lew
2001-12-23 19:01:01 UTC
RE: [CAD_CAM_EDM_DRO] Lindsay DRO Software
Art Eckstein
2001-12-24 03:41:55 UTC
RE: [CAD_CAM_EDM_DRO] Lindsay DRO Software
Robert Bachman
2001-12-24 06:49:25 UTC
[CAD_CAM_EDM_DRO] Follow-up (Lindsay DRO Software)
Sven Peter
2001-12-30 05:26:44 UTC
digital camera again