Re: [CAD_CAM_EDM_DRO] Re: VFD for series 1 bridgeport
Posted by
David M. Munro
on 2001-12-24 19:42:42 UTC
My BP CNC was missing this air motor as well. It mostly functioned as a
spare part mine for other machines. It was never controled by the
computer, but had a button on the control panel.
I replaced it with a standard counterweighted machine crank from MSC.
It is quite geared down, and takes a lot of cranking to effect a speed
change, but it works OK. A pic:
http://www.arcadianclock.com/workshop/cnc/monitor.jpg
David M Munro
b
bjapundza wrote:
spare part mine for other machines. It was never controled by the
computer, but had a button on the control panel.
I replaced it with a standard counterweighted machine crank from MSC.
It is quite geared down, and takes a lot of cranking to effect a speed
change, but it works OK. A pic:
http://www.arcadianclock.com/workshop/cnc/monitor.jpg
David M Munro
b
bjapundza wrote:
>>>The machine is missing the air-powered spindle control. I know
>>>
>very
>
>>>little about how these devices work. Thinking out loud, would it
>>>
>be
>
>>>possible to build a stepper-driven speed control that could be
>>>interfaced with EMC?
>>>
Discussion Thread
bjapundza
2001-12-23 07:12:22 UTC
VFD for series 1 bridgeport
Tim Goldstein
2001-12-23 09:56:32 UTC
RE: [CAD_CAM_EDM_DRO] VFD for series 1 bridgeport
bjapundza
2001-12-23 14:23:31 UTC
Re: VFD for series 1 bridgeport
jakefife
2001-12-23 15:30:33 UTC
Re: VFD for series 1 bridgeport
Tim Goldstein
2001-12-23 15:54:53 UTC
RE: [CAD_CAM_EDM_DRO] Re: VFD for series 1 bridgeport
Matt Shaver
2001-12-23 17:02:47 UTC
Re: [CAD_CAM_EDM_DRO] VFD for series 1 bridgeport
Raymond Heckert
2001-12-23 19:16:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD for series 1 bridgeport
ron ginger
2001-12-23 19:20:52 UTC
Re: VFD for series 1 bridgeport
Bill Vance
2001-12-23 20:39:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD for series 1 bridgeport
Paul Amaranth
2001-12-23 20:49:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD for series 1 bridgeport
Jon Elson
2001-12-24 00:10:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD for series 1 bridgeport
David M. Munro
2001-12-24 19:42:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD for series 1 bridgeport
Raymond Heckert
2001-12-27 18:59:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD for series 1 bridgeport