Re: [CAD_CAM_EDM_DRO] Maximum movement resolution
Posted by
Bob Campbell
on 2002-01-15 16:26:37 UTC
Russell,
I am using G210 Gecko drives set to 2X multiplier. My lead screws are either
4 or 5 turns per inch. This gives me either 4,000 or 5,000 pulses per inch.
I find that this has been a good setting for what I like to do with wood or
plastic.
Bob Campbell
I am using G210 Gecko drives set to 2X multiplier. My lead screws are either
4 or 5 turns per inch. This gives me either 4,000 or 5,000 pulses per inch.
I find that this has been a good setting for what I like to do with wood or
plastic.
Bob Campbell
----- Original Message -----
From: "Russell Shaw" <rjshaw@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, January 15, 2002 5:40 PM
Subject: [CAD_CAM_EDM_DRO] Maximum movement resolution
> Hi all,
>
> What size steps in x and y movement should a cnc router
> have for a 1/8" cutter? What material needs the finest
> steps? What step size would be suitable for plastic,
> wood, and aluminium?
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
Discussion Thread
Russell Shaw
2002-01-15 15:53:58 UTC
Maximum movement resolution
Bob Campbell
2002-01-15 16:26:37 UTC
Re: [CAD_CAM_EDM_DRO] Maximum movement resolution
Russell Shaw
2002-01-15 17:58:18 UTC
Re: [CAD_CAM_EDM_DRO] Maximum movement resolution