Re: [CAD_CAM_EDM_DRO] Taig mill/ step and direction.

The Taig controller uses four phase inputs rather than step/direction.

Tom

On Mon, 21 Jan 2002, Alan Marconett KM6VV wrote:

> Hi Graham,
>
> You might want to ask this question on the Tang list. I'm curious too!
>
> Alan KM6VV
>
> snokket wrote:
> >
> > Hi everyone.
> > Can anyone tell me if the taig cnc controler accepts step and
> > direction signals from the pc, as I am thinking of buying one and
> > would like to run the machine with CNC PRO.
> > Thanks in advance.
> > Graham.
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>