Re: [CAD_CAM_EDM_DRO] Wiring the step and direction pins for the Gecko 201

First, let us know what controller you are going to use. They are not all
the same. Most like cncpro will give you a list of defaults.

Bob Campbell

----- Original Message -----
From: <LAWGAB@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, February 10, 2002 3:41 PM
Subject: [CAD_CAM_EDM_DRO] Wiring the step and direction pins for the Gecko
201


> Hi! I would like to know how to determine the correct pins to use when
> wiring the Disable, Step, and Direction connections on the Gecko 201
driver
> and DB-25 connection.
>
> Please contact me at LAWGAB@...
>
> Thank you
>
>
> [Non-text portions of this message have been removed]
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>