Re: Re: Limit and Homing switches
Posted by
rehenry
on 2002-03-08 07:02:27 UTC
Alan.
The moving vane has the advantage of not tripping a mechanical switch on
each revolution of the screw or motor like a cam would.
Ray
The moving vane has the advantage of not tripping a mechanical switch on
each revolution of the screw or motor like a cam would.
Ray
> From: Alan Marconett KM6VV <KM6VV@...><s>
> Another method I have just been reminded about is to use a "vane"
> attached to the SERVO or stepper shaft that passes through an opto
> switch. This setup can be used somewhat like an index. Could be
> useful on a SERVO where there isn't a motor phase, or the encoder is
> too high resolution to use it's phases.
Discussion Thread
rehenry
2002-03-08 07:02:27 UTC
Re: Re: Limit and Homing switches
Randy Gordon-Gilmore
2002-03-08 11:42:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Limit and Homing switches