XP Mach1 Driver Test
Posted by
art
on 2002-03-14 09:31:21 UTC
Hi All:
Thanks to all for previous tests. The MACH1 driver alpha is located on the
Yahoo Master5 group files section.
It tests your XP for compatibility and displays a spectrum analyser
showing the timing of your system once taken over by Mach1. Mach1 turns the
XP into a real-time system. On my Athlon the spectrum shows jitter in the
nanosecond range, and my 850Athlon shows jitter in the 1uSecond range. The
timer runs at 51,400Hz and is running 6 cubic iterpolators during the test
as well as collecting time data for the spectrum analyser.
If you wish to test it, simply download and unzip the file, then run
Mach1Control.exe and reboot if asked. I can post the file on CAD_CAM_DRO if
anyone has trouble finding it, its very small.
I'd appeciate any crash reports with what kind of CPU doesn't like it.
Thanks,
Art
Thanks to all for previous tests. The MACH1 driver alpha is located on the
Yahoo Master5 group files section.
It tests your XP for compatibility and displays a spectrum analyser
showing the timing of your system once taken over by Mach1. Mach1 turns the
XP into a real-time system. On my Athlon the spectrum shows jitter in the
nanosecond range, and my 850Athlon shows jitter in the 1uSecond range. The
timer runs at 51,400Hz and is running 6 cubic iterpolators during the test
as well as collecting time data for the spectrum analyser.
If you wish to test it, simply download and unzip the file, then run
Mach1Control.exe and reboot if asked. I can post the file on CAD_CAM_DRO if
anyone has trouble finding it, its very small.
I'd appeciate any crash reports with what kind of CPU doesn't like it.
Thanks,
Art
----- Original Message -----
From: <glee@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, March 14, 2002 12:16 PM
Subject: Re: [CAD_CAM_EDM_DRO] archives update.
>
>
> Thank you Terry!
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://www.jobshophomeshop@yahoogroups.com I consider this as a sister
site to the CCED group, as many of the same memembers are there, for OT
subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>